BPDYD - 2136, GLYCEROL ANHYDROUS
- MSDS: BPDYD
- Manufacturer: J T BAKER INC
- Product Name: 2136, GLYCEROL ANHYDROUS
- National Stock Number: 6810-00-185-7022
Product Identification
Product ID:2136, GLYCEROL ANHYDROUS
MSDS Date:11/05/1986
FSC:6810
NIIN:00-185-7022
MSDS Number: BPDYD
Responsible Party
PHILLIPSBURG, NJ 08865-2219
US
Emergency Phone: 908-859-2151;800-424-9300(CHEMTREC)
Info Phone: 800-582-2537
Cage: DO803
Contractor
Telephone: 800-582-2537
Cage: 70829
Ingredients
GLYCERIN (MIST); (GLYCEROL, ANHYDROUS)
CAS: 56-81-5
RTECS: MA8050000
Fraction By Weight: 90-100%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 (MIST) 9293
Hazards
LD50 LC50 Mixture:LD50:(ORAL,MOUSE)26 G/KG.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MAY CAUSE IRRITATION. NO EFFECTS OF
OVEREXPOSURE WERE DOCUMENTED.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE IDENTIFIED.
First Aid
First Aid:INGEST:IF SWALLOWED & PERSON IS CONSCIOUS, IMMED GIVE LG AMTS
OF WATER. GET MD. INHAL:IF PERSON BREATHES IN LG AMTS, MOVE EXPOSED
PERSON TO FRESH AIR. GET MD. EYE:IMMED FLUSH W/PLENTY OF WATER FOR
AT LEAST 15 MINUTES. GET MD. SKIN:IMMED WASH W/PLENTY OF SOAP &
WATER FOR AT LEAST 15 MINUTES.
Fire Fighting
Flash Point Method:CC
Flash Point:390F,199C
Extinguishing Media:USE EXTINGUISHING MEDIA APPROPRIATE FOR SURROUNDING
FIRE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:CONTACT WITH STRONG OXIDIZERS MAY CAUSE
FIRE OR EXPLOSION. TOXIC GASES PRODUCED:CO, CO*2.
Accidental Release
Spill Release Procedures:WEAR SUITABLE PROTECTIVE CLOTHING. TAKE UP
W/SAND OR OTHER NONCOMBUSTIBLE ABSORBENT MATERIAL & PLACE INTO
CONTAINER FOR LATER DISPOSAL. FLUSH SPILL AREA W/WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:DO NOT STORE NEAR OXIDIZING MATERIALS.
DURING USE AVOID CONTACT W/EYES, SKIN, CLOTHING. WHEN NOT IN USE
KEEP IN TIGHTLY CLOSED CONTAINER.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPRVD RESP PROT REQUIRED IF AIRBORNE
CONCENTRATION EXCEEDS TLV. AT CONCENTRATIONS ABOVE 10 MG/M3, A
NIOSH/MSHA APPROVED DUST/MIST RESPIRATOR IS RECOMMENDED.
Ventilation:USE ADEQUATE GENERAL OR LOCAL EXHAUST VENTILATION TO KEEP
VAPOR & MIST LEVELS AS LOW AS POSSIBLE.
Protective Gloves:RUBBER GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:LAB COAT.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:554F,290C
Melt/Freeze Pt:M.P/F.P Text:64.4F,18.0C
Vapor Density:3.2
Spec Gravity:1.23 (H*2O=1)
Solubility in Water:APPRECIABLE (>10%)
Appearance and Odor:CLEAR, COLORLESS, ODORLESS SYRUPY LIQUID.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CO, CO*2.
Disposal
Waste Disposal Methods:DISPOSE OF I/A/W ALL APPLICABLE FEDERAL, STATE &
LOCAL ENVIRONMENTAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.